X1p UL913
UL913 and CSA Certificated Explosion-proof Safety
Hytera X1P intrinsic safety radio is designed upon the requirements of USA UL913 and Canada CSA standard, the radio works safely in most hazardous environments with explosive gas and dust particles.
Advanced encryption
GPS positioning
The built-in GPS module supports GIS applications.
Dual modes (analog & digital)
Dual modes (analog & digital) operation ensures a smooth analog-to-digital migration.
Versatile voice calls
Versatile voice calls include individual call, group call and all-call.
Vibration
Vibration alerts the reception of voice call and message.
Rich signaling
Support multiple advanced analog signaling, including HDC1200, DTMF, 2-Tone and 5-Tone, providing more expansion capacity.
Software up-gradable
Up-gradable software enables new features without buying a new radio.
| General | ||
| Frequency Range | UHF1: 400-470MHz; UHF2:450-520MHz; UHF5: 806-941MHz*; VHF: 136-174MHz | |
| Channel Capacity | 1024 | |
| Channel Spacing | 25/20/12.5KHz | |
| Operating Voltage | 7.4V (rated) | |
|
Battery
(5-5-90 Duty Cycle, High TX Power)
|
1100mAh Li-ion battery/1400mAh Li-ion battery/1800mAh Li-ion battery | |
|
Battery Life
(5-5-90 Duty Cycle, High TX Power)
|
Digital: about 13 Hours (1400mAh Li-ion battery) |
|
| Frequency Stability | ±1.5ppm | |
| Antenna Impedance | 50Ω | |
|
Dimensions (H×W×D)
(with standard battery, without antenna)）
|
119.5 X 57 X 23mm (1400mAh Li-ion battery) | |
| Weight (with antenna & standard battery) | about 280g (1400mAh Li-ion battery) | |
| Transmitter | ||
| RF Power Output | VHF High Power: 5W VHF Low Power: 1W UHF1/UHF2/UHF3 High Power: 4W, UHF1/UHF2/UHF3/UH5 Low Power: 1W UHF5 High Power: 3W (806-870MHz), 2.5W |
|
| FM Modulation |
11K0F3E @ 12.5KHz
14K0F3E @ 20KHz
16K0F3E @ 25KHz
|
|
| 4FSK Digital Modulation |
12.5kHz Data Only: 7K60FXD
12.5kHz Data & Voice: 7K60FXW
|
|
| Conducted/Radiated Emission |
-36dBm<1GHz
-30dBm>1GHz
|
|
| Modulation Limiting |
±2.5KHz @ 12.5KHz
±4.0KHz @ 20KHz
±5.0KHz @ 25KHz
|
|
| FM Noise |
40dB @ 12.5KHz
43dB @ 20KHz
45dB @ 25KHz
|
|
| Adjacent Channel Power | 60dB @ 12.5KHz; 70dB @ 20/25KHz | |
| Audio Response | +1 ~ -3dB | |
| Audio Distortion | ≤3% | |
| Digital Vocoder Type | AMBE++ or SELP | |
| Digital Protocol | ETSI-TS102 361-1, 2&3 | |
| Receiver | ||
| Sensitivity | Analog |
0.3μV (12dB SINAD)
0.22μV (Typical) (12dB SINAD)
0.4μV (20dB SINAD)
|
| Digital | 0.3μV /BER5% | |
|
Selectivity
TIA-603
ETSI
|
60dB @ 12.5KHz / 70dB @ 20&25KHz
60dB @ 12.5KHz / 70dB @ 20&25KHz
|
|
|
Intermodulation
TIA-603
ETSI
|
70dB @ 12.5/20/25KHz
65dB @ 12.5/20/25KHz
|
|
|
Spurious Response Rejection
TIA-603
ETSI
|
70dB @ 12.5/20/25KHz
70dB @ 12.5/20/25KHz
|
|
| S/N |
40dB @ 12.5KHz
43dB @ 20KHz
45dB @ 25KHz
|
|
| Rated Audio Power Output | 0.5W | |
| Rated Audio Distortion | ≤3% | |
| Audio Response | +1 ~ -3dB | |
| Conducted Spurious Emission | < -57dBm | |
| Environmental Specifications | ||
| ESD |
IEC 61000-4-2 (level 4)
±8kV (contact)
±15kV (air)
|
|
| American Military Standard | MIL-STD-810 C/D/E/F/G | |
| Dust & Water Intrusion | IP67 Rating | |
| Humidity | Per MIL-STD-810 C/D/E/F/G Standard | |
| Shock & Vibration | Per MIL-STD-810 C/D/E/F/G Standard | |
| GPS | ||
| TTFF (Time To First Fix) Cold Start | <1 minute | |
| TTFF (Time To First Fix) Hot Start | <10 seconds | |
| Horizontal Accuracy | <10 meters | |
en_X1p UL913 Brochure update: 2017-12-27 |
Download ↓ |
