Multiple Sites via IP
Analog Scan
The RD628 supports Analog voice and signaling scan, allowing coverage of different analog voice users from various groups.
Repeater Diagnostic And Control (RDAC)
RD628 supports Remote IP connection to monitor, diagnose and control the repeater, thus increasing maintenance efficiency. The Hytera developed RDAC is able to support multiple master network connection, allowing the radio administrator to monitor multiple radio networks.
AC/DC Auto Switch
RD628 integrates an internal power supply that supports battery floating charge. The power supports 13.6V±15% DC and 90V-264V AC. If the AC power is cut off, the DC power (battery) automatically takes over without interruption.
Analog/Digital Back-to-Back Interconnect
RD628 supports different operating modes of Analog and Digital to interconnect for voice cross patch, allowing analog users to communicate with digital users and vice versa. This allows for a smooth migration for Analog users to the digital world.
Multi CTCSS/CDCSS Decode
RD628 supports decoding up to a maximum of 16 CDCSS/CTCSS codes in Analog channels, allowing coverage for different Analog voice users from various groups.
Analog/Digital Telephone Interconnect
RD628 supports simplex voice communications between radio and telephone users. It allows a radio user to make a telephone call; or a telephone user to make either a Group or Private call to radio users. This feature utilizes the Commercial off the Shelf (COTS) Analog Phone Patch boxes and a Plain Old Telephone Service (POTS) line to connect the Repeater to the Corporate Office Phone System (PBX) or Public Switched Telephone Network (PSTN).
Analog/Digital Auto Switch
RD628 supports Analog and Digital channel auto switching, allowing for efficient frequency sharing between Analog and Digital users and an easy digital migration.
All-In-One Compact Design
RD628's compact design, integrates RF, Power supply, and duplexer into one box, which makes RD62X smaller, lighter, and easier for wall-mount installation and indoor coverage.
Repeater Access Management
RD628 supports a repeater access control feature allowing better security to prevent unauthorized users from accessing the radio network.
General
|
|||
Frequency
|
136-174MHz, 400-470MHz
|
||
Channel Capacity
|
16
|
||
Channel Spacing
|
12.5kHz/20kHz/25kHz
|
||
Operating Voltage
|
13.6±15%V DC
100V-240V AC
|
||
Current Drain
|
Standby
|
≤0.5A
|
|
Transmit
|
≤5.5A
|
||
Frequency Stability
|
±0.5ppm
|
||
Antenna Impedance
|
50Ω
|
||
Duty Cycle
|
100%
|
||
Dimensions (H×W×D)
|
210x348x108mm
|
||
Weight
|
5 kg
|
||
Transmitter
|
|||
RF Power Output
|
1-25W Continuous
|
||
FM Modulation
|
11K0F3E@12.5kHz
14K0F3E@20kHz
16K0F3E@25kHz
|
||
4FSK Digital Modulation
|
12.5kHz Data Only: 7K60FXD
12.5kHz Data & Voice: 7K60FXW
|
||
Conducted/Radiated Emission
|
-36dBm <1GHz
-30dBm >1GHz
|
||
Modulation Limiting
|
±2.5 kHz @ 12.5 kHz
±4.0 kHz @ 20 kHz
±5.0 kHz @ 25 kHz
|
||
FM Hum & Noise
|
40dB @ 12.5 kHz
43dB @ 20 kHz
45dB @ 25 kHz
|
||
Adjacent Channel Power
|
60dB@12.5kHz
70dB@20 /25kHz
|
||
Audio Response
|
+1 ~ -3dB
|
||
Audio Distortion
|
≤3%
|
||
Digital Vocoder Type
|
AMBE++ or SELP
|
||
Digital Protocol
|
ETSI-TS102 361-1,-2,-3
|
||
Receiver
|
|||
Sensitivity
|
Analog
|
0.3μV (12dB SINAD)
0.22μV (Typical) (12dB SINAD)
0.4μV (20dB SINAD)
|
|
Digital
|
0.3uV/BER5%
|
||
Adjacent Channel Selectivity
|
TIA-603: 65dB @ 12.5 kHz ;75dB @ 20/25 kHz
ETSI: 60dB @ 12.5 kHz ;75dB @ 20/25 kHz
|
||
Intermodulation
|
TIA-603: 75dB @ 12.5/20/25 kHz
ETSI: 70dB @ 12.5/20/25 kHz
|
||
Spurious Response Rejection
|
TIA-603: 75dB @ 12.5/20/25 kHz
ETSI: 70dB @ 12.5/20/25 kHz
|
||
Blocking
|
TIA-603: 90dB
ETSI: 84dB
|
||
Hum and Noise
|
40dB @ 12.5KHz
43dB @ 20KHz
45dB @ 25KHz
|
||
Rated Audio Distortion
|
≤3%
|
||
Audio Response
|
+1 ~ -3dB
|
||
Conducted Spurious Emission
|
<-57dBm
|
en_RD628 Brochure update: 2023-07-18 |
Download ↓ |